hi guys please help

G

george1234

Member

Aug 17, 2005

6

0

• Aug 17, 2005

• #1

hi guys great forum
ive been reading here for a while but i need help
so heres the thing
i was out on sunday and the bike just jammed
now after stripping down i know that the big end and piston are gone
but my dilemma is the cylinder barrel is badly scored and ive been quoted about £150 to get it repaired
but ive been offered a barrel off of a 2001 cr250 a lot cheeper
but would it fit i know the piston is the same but would it work
many thanks for any replys

 

Papakeith

COTT Champ Emeritus

Damn Yankees

Aug 31, 2000

6,695

51

RI

• Aug 17, 2005

• #2

I moved your thread over here. Someone will help you out soon.

Is the bike in question the 97 CR250 you have listed?

 

G

george1234

Member

Aug 17, 2005

6

0

• Aug 17, 2005

• Thread starter
• #3

yes it a 97 cr250 only had it 3 months
must have been abused by previous owner
wanting to get it fixed correct so i can have many days in the field
i dont race just play so the bike is not ridden hard at all

 

B

bikepilot

Member

Nov 12, 2004

804

0

• Aug 17, 2005

• #4

I'm not totally, certain, but I the 01 CR cylinder should mount to your cases and use the same bore diamater as your 97 cylinder. There may be differences in the PV mechanism but probably not. I know some folks swap the 99 cylinder onto their 01's to get a smoother power delivery for woods riding, (and vice versa for mx and dez). The 01 cylinder should yeild a little performance improvement as well with its updated porting specifications. 02 and up cylinders would most certainly not fit, as they are a case reed engine. If it were my bike I'd try the 01 cylinder if the price were right:)

 

CR3999

Member

Feb 28, 2000

163

2

• Aug 17, 2005

• #5

Yes it will work. But get a 01 piston

 

G

george1234

Member

Aug 17, 2005

6

0

• Aug 18, 2005

• Thread starter
• #6

thanks guys
should i try and get the powervalve system too
or just use the one i have
many thanks