wrobdog

Member
Jun 3, 2004
3
0
Hello all, i just rebuilt my sons Z50 including replacing the cam with a performance CAM. Could someone please explain to me the steps for timing the CAM, when explaining i'm the guy that would have Honda Z50 for dummies. Thanks and awsome site...
 

wrobdog

Member
Jun 3, 2004
3
0
Biglou, the cam timing is done, the only thing thats happen when i try to kick start it is some pops and back fire. I've check the gas, spark plug (good spark) Any help on why this Z50 won't start. The only thing i changed different from this time to last time i rebuilt the engine is the new mini cam.
 
B

biglou

Not sure. Mine started pretty easily once I got the carb tweaked in close. Other than putting on the big bore kit with new carb and hot cam, I don't have too much experience with these. I'll move this over to the mini forum, lots more mini-specific traffic there...
 

1966mustang

Member
Jun 8, 2004
84
0
i HAVENT HAD ALOT OF EXPERIENCE WITH THOSE BUT FROM WHAT I CAN TELL SAOUNDS LIKE YOU DONT HAVE IT TIMED PERFECTLY I WOULD CHECK AGAIN BUT DONT TAKE MY WORD FOR IT.
 
Top Bottom