whenfoxforks-ruled

Old MX Racer
~SPONSOR~
Oct 19, 2006
8,129
2
Merrillville,Indiana
First, you need to tighten your rear spring until you achieve 4 inches. The difference between the unloaded measurement(25.25) and the weight of the bike(20.25) is called static sag, I will have to double check that one. And the 20.25 measurement must be taken on no stand, just the weight of the bike standing alone. Help is required, as if you have not found that out. The unloaded measurement sometimes requires you to pull up to completely unload the shock.
 
Top Bottom