j12froid said:
k so my 01 honda cr125r has alot of drag. when i have it in gear and im holdin the clutch its it feels like the gear is still catch like the clutch isnt disengaging. i have adjusted the clutch on the handlebar. also there is hardly any compression on the kickstart. prolly equivilent to a 50cc. r these problems connected . how can i fix them. thanks guys
You should start a new post with this, but I'll help you as much as I can.
If your clutch isn't fully disengaging, TIGHTEN up the clutch cable on the handlebar. This will move your throw out from the bars and give you more room to get a full disengagement.
The kick-starter is supposed to be VERY light on your bike. There is no adjustment for it. The only way to test compression of the motor is through a compression gauge, or by physically spinning the flywheel with your hand to feel the compression. The starter is designed to be geared very, very low for easy starts.
Basically you're in good shape, just tighten up the clutch cable and feel-out where you get full disengagement.
Good luck!
Dan