Has anybody experience of using Kibblewhite exhaust valves in a Husky 610.I have just purchased a set which is labled 510/610 exhaust valve.Only problem is that the standard Husky Exhaust valve is 32mm & the Kibblwhite is 30mm diameter.
On putting the valve into the head the valve is lower inside the seat.Seem like it might work but can't work out why this is the case & if there would be enough valve seat area for a good seal & to prevent it burning out.I have checked with my supplier who has checked with Kibblewhite & the sizing is correct by them.
My supplier has not used these valves so has no hands on knowledge.Anybody can help? SFO or Mike Perry anybody
Thanks
On putting the valve into the head the valve is lower inside the seat.Seem like it might work but can't work out why this is the case & if there would be enough valve seat area for a good seal & to prevent it burning out.I have checked with my supplier who has checked with Kibblewhite & the sizing is correct by them.
My supplier has not used these valves so has no hands on knowledge.Anybody can help? SFO or Mike Perry anybody
Thanks