RSTChris

Member
Jul 25, 2007
16
0
Well ive been away for a couple of weeks, left the bike sitting there.

Came to it today, fitted a carb off a mates bike id seen running 30mins earlier, fitted it, started for a minite or so then cut out and wont start bk up, any other ideas?

Ive got his full bike as spares so what would be the next logical thing to change, the cdi unit? Stator plate + flywheel?

Could it just be ive used some dodgy petrol? it did come from a top supplier....
 

brix31

Member
Jun 24, 2006
23
0
Use some advice that people have told u, spray some carb cleaner on some parts of the engine around the head gasket and other places. If it revs up u got a bad gasket. Also check to see if the exhaust is tight on to the cylinder.
 
Top Bottom