i need tips for my CR on enduro..

[hgt]

i need tips for my CR on enduro..
i'm from Dominican Republic, i have a CR 250 '01, i'm using it on enduro, i looking for a manual or tips that can help me to calibrate the carburator for the best perfomance, that is because it is very different than motocross,, also i will like to find tips to do the best setting to the susspensions, about my weight, size, etc...
I believe that can exist, because i had a RMX, and GASGAS before and it where a little manual that help on everything. and i always try to do it myself..

i hope you understand, sorry, we speak spanish..

thank you..

 

[helio]

hjt,

Try a good reading at the following link...It should help you to have a good starting point for suspensions.
http://www.mx-tech.com/tuning_offroad.asp

About to soften the beast for Enduro I suggest you to use the search function to find a very good information about that subject.

BTW I speak Portuguese but if needed I can also speak Spannish my friend :aj: .
Welcome aboard.

 

[yzeater]

A search usually helps:
http://www.dirtrider.net/forums3/showthread.php?s=&threadid=58562&highlight=CR250
http://www.dirtrider.net/forums3/showthread.php?s=&threadid=56156&highlight=CR250
http://www.dirtrider.net/forums3/showthread.php?s=&threadid=42816&highlight=CR250
http://www.dirtrider.net/forums3/showthread.php?s=&threadid=37042&highlight=CR250
http://www.dirtrider.net/forums3/showthread.php?s=&threadid=34244&highlight=CR250

 

[yzaniac]

What is this first, second clip that you talk about.

 

[yzaniac]

Scratch that last Q' But does going down richen or lean the bike.. ...I had forgotten about the notches on the needle.

Duh inhaling to much mix:)