I'm going crazy!!! (CR125)

P

plumma

Member

Feb 21, 2005

74

0

• May 6, 2005

• #1

Ok, I just put in a new clutch kit with a new clutch cable in my 02 CR125. Now after tweaking the cable adjusters almost 15 times to get the correct 3/4in freeplay, the bike just seems to keep slipping in low gears. What is up with this? does it need to be broken in? I oiled the plates before putting them in the basket. PLEASE help! thanks. :bang:

 

D

DirtIsMyName

~SPONSOR~

Apr 16, 2005

20

0

• May 7, 2005

• #2

Some bikes have two adjustments. One on the cable, maybe at both ends, and one on the clutch linkage. Break-in won't fix slippage, you have a problem.

 

P

plumma

Member

Feb 21, 2005

74

0

• May 7, 2005

• Thread starter
• #3

Well the cable has one adjuster on the lever end of the cable. There is also an adjuster on the bracket itself. I have messed with both to get the required 3/4 inch freeplay. But still the clutch seems to slip in every once in awhile in 1st gear...

 

Last edited: May 7, 2005

M

mobrown

Member

Jan 26, 2004

198

0

• May 8, 2005

• #4

Shafts

Make sure any and all shafts that are associated with the clutch are not bent. If one is it will not move freely and as designed.

 

P

plumma

Member

Feb 21, 2005

74

0

• May 16, 2005

• Thread starter
• #5

Ok, i found out it was actually a jetting problem.. not a clutch problem. I leaned out the main and now there is no "slipping". Thanks for the help though!