jetting for pc pipe on a 00 kdx 200

KDX1

Mod Ban
Jun 5, 2001
228
0
I have a 00 KDX 200 with a PC pipe and silencer. I have never touched the jetting on the carb. I do have some spooge on the end of the silencer, but it is not so much that it is dripping out. My question is do I need to change the stock jetting on the carb. The bike runs well but I can't really tell if it needs to be re jetted. What should the new jet settings be? Any help on this would be appreciated.

" Do tubes and catch some air"

00 KDX 200
AMA
GNCC:think
 
Top Bottom