Guys, I've been getting bombarded with jetting questions. You've got me confused with someone that knows something! :scream:
I learned all I know from:
1. Reading posts
2. Trying things on my bike
3. Seat of the pants dyno runs
4.reading JUSTKDX
5. e-mailing a few members of the infamous "RB carb trerad" found in the technical archives forum.
check out this link below and learn. Then buy some jetsfrom sudco and test your seat of the pants dyno!
Good luck guys. Keep in mind I knew nothing last March when I got my KDX after not riding a bike in 17 years, if I can learn you can too. I'm a lousy mechanic!
just turn those little gears around which ever way you want when you take the top end apart. Make sure you have a strong piston so when it clanks against the Kips side ports it don't crack. :debil: :debil: :confused:
weve come up with a better idea,im gonna take it to service tomarrow,its only a few blocks away,get aj to shoehorn a cr500 motor in there.no powerports,no jetting problems:cool: