I'm running a 36mm Air Striker on an air cooled 87 motor. I bought it off ebay, it was set up for another bike. I changed the jetting to spec based on an 88's PWK35.
It's running strong but loading up after 15-20 mins riding.
Can anyone recommend starting point jetting for this type of carb. It's standard (not RB modded).
The slide has 45 stamped on it.
Jetting at the moment is
M 155
P 48
N CEJ clip in the middle
(Spare needles include DEK, CCJ and BGP.)
Thanks for any help. There are a few variables here, and I'm guessing this type of carb has its own quirks. It would be good to know where to start.