Jetting Question for KDX 200 With Pro Circuit Pipe

[Dakota Kid]

Hi Guys,

I have recently purchased a 2000 KDX 200 (this is now my third KDX in the garage, also have 02 200 and 220). I bought this pipe with a Pro Circuit platinum pipe on it with the 304 silencer on it. It has quite the snap compared to the other 2 stock KDX's. The new bike is stock except for the pipe. Anyone have suggestions on what I should run in jetting for this? I ride mostly in Minnesota, roughly 1000 ft elavation.

Thanks,
Dakota Kid

 

[John Harris]

Jetting is trial and error for every bike, but I think you will be happier with 42 or 45 pilot and probably a 155 main. Stock for a later model 200 is about 48 pilot and 165 main. Your new bike may already have close to these jets in it! Cheers John

 

[Dakota Kid]

Thanks John, Sounds like a good starting point! I will keep an eye on the plug!

Dakota Kid

 

[jason33]

call pro curcuit tell them u bought there stuff and ask- theyll help-
also- put in a new set of carbon fiber reeds, and jet the main accordingly you will be happy- follow the instructions