K kdx357 Mod Ban Nov 20, 2001 122 0 Apr 26, 2002 #1 i just cut out the insides of my pipe and got it together good. what jets should i buy also i noticed some spot welds right in front of the stinger . is this also material that should be removed.
i just cut out the insides of my pipe and got it together good. what jets should i buy also i noticed some spot welds right in front of the stinger . is this also material that should be removed.
Canadian Dave Super Power AssClown Apr 28, 1999 1,202 0 Apr 26, 2002 #2 No don't worry about the material in the stinger area. Check out the Jetting Guide on the JustKDX web page. You'll find some jetting recommendations there. David
No don't worry about the material in the stinger area. Check out the Jetting Guide on the JustKDX web page. You'll find some jetting recommendations there. David
K kdx357 Mod Ban Nov 20, 2001 122 0 Apr 26, 2002 Thread starter #3 it suggests running leaner jets is this right
Canadian Dave Super Power AssClown Apr 28, 1999 1,202 0 Apr 29, 2002 #4 Leaner than stock yes. You'll be able to stick with your stock jet needle though. David