Kdx 200 e1 jetting

[bikernut]

Hi
I am the proud owner of an e1 89 kdx200 which I have had for about 2months and loving every minute of it!

But I am wanting a bit more power as I am starting to get used to the bike, I have modded the standard expansion pipe, fitted boyesen reeds, removed the airbox lid and have an fmf silencer. My question is that I'm am totally confused when it comes to the jetting to suit my mods. Would somebody be able to point me in the right direction maybe a complete idiots guide or something

Can I ride it as it is?

 

[Tom68]

If it was mine I'd be moving the needle up and down to see what it likes stay away from full throttle (main jet) until you know which way you need to head from the needle changes.Not very scientific but you do need to become your own expert with jetting, lots of good info on these sites to help you.

 

[bikernut]

so general idea for my mods is more fuel?

 

[glad2ride]

You need to get it jetted to run as best it can with the equipment, altitude, humidity, etc. that you have.