KDX Crank seals?

[motopsycho87]

Is it possible on the kdx200 pre95 to replace the crankcase seals without splitting the cases? On a large amount of 2-stroke you can just strip either side down, stab the seal, yank it out and tap a new one in. Is the KDX an exception?

Thanks guys! :uh:

 

[julien_d]

nope.

 

[motopsycho87]

:( waa.

 

[julien_d]

It's really for the best IMO. If the crank seals are leaking, it's quite likely you need to change the mains as well. Always figured that's what kawi had in mind with the design. Splitting the cases is not so difficult.