cqctt321

Member
Oct 18, 2021
1
0
Any help is greatly appreciated.
My problem is bottom-end torque.
Purchased used and as it stands now:
FMF header and silencer. Turbine core - Header not sure.
Boyesen Rad Reeds
13/47 gearing.
KIPS cleaned and working.
jetting is a 150 and 48
No low-end torque and has a very strong mid and upper.
Any ideas on increasing the low end for tight technical riding.
 

RM_guy

Moderator
Damn Yankees
LIFETIME SPONSOR
Nov 21, 2000
7,045
208
North East USA
Adjust to power valve. Turn it in for more low end. Check the compression too. It should be higher than 150 psi...the higher, the better.
 
Top Bottom