scott_ktm

Member
Feb 13, 2001
112
1
Barnett make plates for KTMs. I don't know if they cost any more than CRs, Moose makes them know also.

------------------
“ If we weren’t all crazy we would go insane” Jimmy Buffett
'99 KTM 380sx
 

Smail's98KTM

Member
Apr 10, 2001
25
0
Instead of wasting time on expensie high performance clutches stock honda clutches are way more affordable and they work really good and last...stick with the steel plates if you can but aluminum will make your bike rev faster....

------------------
Katooms rule
 

MXP1MP

Member
Nov 14, 2000
1,845
0
There's no difference in a '99 & 2000 clutch plate designs, only difference was the 200 just got a new clutch basket and one more clutch plate going from 7 to 8.

Joe
'01 CR125

------------------
 

tonyr

Member
Feb 15, 2000
20
0
Cr 125 clutch Plates and springs do fit in the KTM 200. I have steel honda plates and springs in my 200 and they work fine. The springs reduce the pull dramatically at the lever and I have not noticed any slipping yet. CR thottle cables also fit better than stock because they are about 4" longer and you can route the cable down the left side of the frame.

------------------
 

Smail's98KTM

Member
Apr 10, 2001
25
0
the 2000 has the same as 99 the 2001 is when they changed the plates and by the way the reason that i said to buy pre 2001 is so you dont get the extra plates.....

------------------
Katooms rule
 


Top Bottom