katoom125sx

Member
Aug 19, 2002
1
0
I have a KTM125SX-02 ,whilst tightening the cylinder head bolts to 25lbs as the workshop manual states the threads felt as if they were going to strip so I stopped,unfortunately when I rode the bike 1 bolt came right out with the inevitable water leak,I would like to know the best method of repair? shall I go for a helicoil? do you think 25lbs is the correct torque?
Can I re-use the rubber O-ring cylinder head gaskets?

I would appreciate your thoughts on my predicament

yours in sport
:D
 

Jeff Gilbert

N. Texas SP
LIFETIME SPONSOR
Oct 20, 2000
2,969
2
A helicoil will be your best bet if there's enough clearance for the water jacket. You sound like you're having my kind of luck today.
 

yzexctxt

Member
Nov 7, 2001
15
0
check the manual again for the torque specifications, i misread the manual when doing a head gasket on my 200. the 200 head bolts were 15lbs or less, cannot remember. the manual is not well written.
 
Top Bottom