detox250kx

Member
May 24, 2007
24
0
my 250 kx this bike wants to move with the clutch lever all the way down. i have adjusted both areas of the cable by the bars and down low but it doesn't do the trick. i am wondering if this is my clutch plates does anyone know if i'm right
 

CR500pilot

Member
Feb 29, 2000
46
0
I'd pull the clutch cover and check out your clutch basket. The fingers of the outer basket where the clutch plates ride are grooved and the plates hang up. If they're not too bad you can file them smooth and get some more use from the clutch basket. If they are deeply grooved you may need a new basket.
 
May 24, 2007
2
0
Clutch Siezed

I HAD THE SAME PROBLEM WITH MY KDX 200.
moisture was getting in my tranny from behind the counter sprocket,the spacer behind the sprocket had wore down and let some water in and it would cause my clutch pack to rust and stick together. check your clutch plates for any signs of rust. check your oil any moisture, could be the cause.
 
Top Bottom