flogga400

Member
Nov 12, 2001
9
0
Please tell me some good news! I just finished a complete rebuild on my 94 kx 250. Problem is I forgot to install the new o rings on the counter shaft! Obviously I have a big oil leak now. I am hoping I can gently pull the seal and slide the orings in from the outside. Is this possible or am I gonna have to split the cases again? Does anyone know how far in the o rings go?
 

IndyMX

Crash Test Dummy
~SPONSOR~
Jul 18, 2006
5,548
2
Amo, IN
You should be able to just take the sprocket off, then pull the sleeve off and take the orings out that way..

No need to split the cases, no need to pull the seal.
 
Top Bottom