Bet On Red

Member
Aug 11, 2003
85
0
I think my dad lost my manual already... I cant seem to find how much motoroil to add into my crank case. It's a 2003 cr 125. any help would be great. thanks
 

endosports

Member
Jan 10, 2002
494
0
Originally posted by Bet On Red
nm.. i forgot it's written on the side of my crank case. *DOH*

Written? dont you mean stampted?

Good Homer impression.

I remember good someone told me Rob Healy used to just throw the whole quart in the case.

I had another buddy named Tomo fill it all the way full!!
 

Bet On Red

Member
Aug 11, 2003
85
0
it's stamped but i also wrote the exact amount with a sharpie marker after i got the bike home :) That way i dont have to waste brain space and also dont need the manual! lolz

how much oil do YOU put in?
 

dthoms

Member
Oct 6, 2002
175
0
My guess would be about 700-900 ML, or a little short of a quart.
Either way there should be a check bolt in the case (on the clutch side)
and you would fill it up until the oil comes out of that hole. Don't just use motor oil on a CR use a good quality motorcycle oil, or gearsaver oil that was designed for your bike.
DT.
 

Bet On Red

Member
Aug 11, 2003
85
0
Originally posted by dthoms
My guess would be about 700-900 ML, or a little short of a quart.
Either way there should be a check bolt in the case (on the clutch side)
and you would fill it up until the oil comes out of that hole. Don't just use motor oil on a CR use a good quality motorcycle oil, or gearsaver oil that was designed for your bike.
DT.

i added about half a quart in.. When i drained the oil it was about half also... This bike is new... the shop added the first amount of oil... so stick with half or go with almost one quart?
 
Top Bottom