Lower Heim Bearing seal install - ktm

Joined
Mar 9, 2003
Messages
38
Likes
0
#1
I have somewhat of a silly question. When installing the rubber seal into the heim housing on both sides - how far in should I press the seal in (flush?) I am using the stock seal with the metal rim and have mine pressed in straight up to where the rounded outer area starts. Should I press it in til flush?

Thanks
 

zero_it

Subscriber
Joined
May 20, 2000
Messages
287
Likes
0
#2
Yes. They need to be in all the way to provide clearance for the shock and allow the shock to turn on the heim just a bit without coming up hard against the outside diameter of the seal.