Servus,
I installed some updated parts in a WP 43mm USD fork including a new spring for the mid valve. As the new spring is much stiffer than the stock one, I'd like to know which range of the damping is influenced by the spring only; the shim stack was not changed. From a feeling I'd say VLSC (very low speed comp), but if you compare the force needed to compress the spring and to bend the shims I didn't feel much difference!
Michael
I installed some updated parts in a WP 43mm USD fork including a new spring for the mid valve. As the new spring is much stiffer than the stock one, I'd like to know which range of the damping is influenced by the spring only; the shim stack was not changed. From a feeling I'd say VLSC (very low speed comp), but if you compare the force needed to compress the spring and to bend the shims I didn't feel much difference!
Michael