the_big_1

Member
May 24, 2007
2
0
Dear all,

Is there an easy way to set the mixture screw on a 2 stroke to get it pretty much right?
I know the "1 1/2" turns out etc but is this spot on or is there a better mthod i.e engine tick over speed etc.
 
May 9, 2007
104
0
You set it by feel. Ride the bike, and play with the screw until you find the setting that provides the best response when opening the throttle.

If you end up less than 1 turn open or more than 2.5 turns open your pilot jet is the wrong size.
 
Top Bottom