ilikeriding
Member
- Jul 19, 2002
- 18
- 0
ok here we go again...If some you may remember i posted here about my rear calipers piston that wasn't moving, so i popped it out, put in new seals in, but no luck, nothing was moving. So before i did anything else i bled the rear brake for s.hits and giggles. but when i bled it... i noticed nothing came out of the bleed hose, so i took the brake line out of the caliper and noticed that when i pushed down the pedal, very very little came out of the hose.. so i think it could be clogged. Or is it supposed to be a very little amount that flows through the lines like that? I don't know much about brakes. help me! I want to ride this god damn bike as soon as possible! (1992 Cr125)