Need cabrurator part

F

fusion

Member

Jan 25, 2009

53

0

• Jul 29, 2009

• #1

Hey everyone! So my pilot jet is stuck in the carb and i need a new removable venturi. Can i buy one or do i have to get a whole new carb?

 

M

mideastrider

~SPONSOR~

Jul 8, 2006

827

1

• Jul 29, 2009

• #2

Carb Parts Warehouse may can help you out with that problem.

 

J

julien_d

Member

Oct 28, 2008

1,788

1

• Jul 29, 2009

• #3

that part is actually specified as "do not remove". So although it is technically "removable", I do not know if there is a replacement part available. SUDCO might be able to help you out if you call them up.

 

N

nearma12

Member

Mar 29, 2009

20

0

• Jul 29, 2009

• #4

Is the jet just stripped so you can't get it out with a screwdriver? If so, maybe an easyout bit will work.

 

F

fusion

Member

Jan 25, 2009

53

0

• Jul 29, 2009

• Thread starter
• #5

nearma12 said:

Is the jet just stripped so you can't get it out with a screwdriver? If so, maybe an easyout bit will work.

Click to expand...

I tried a easy out but it didnt work :( the brass is too soft.
Have not found anyone that can get the venturi, i might have to buy a new carb :((.

 

J

jonooffler

Member

Jun 10, 2009

77

0

• Jul 30, 2009

• #6

Hi there one trick to try is to heat up the venturi a little bit that will make it expand and the pilot might just come out a bit easier.
Wait for the wife to go out and then bung it in the oven for a short time at a low heat ;) .
I have done that with other stuck treads and it's worked every time,
I would make sure that the carb is very clean first.
Jono