NX125 steering stem bearing removal

89nx125

Member
Oct 23, 2007
16
0
I'm trying to replace the steering stem bearing on my 89 NX125. I got the bearings out and the old races of the steering stem, but I can't get the outer races out of the frame. There is a small lip on there, but I can't find anything to get a grip on it with. I even tried a chisel from the other side, but I can't get enough angle and the chisel slips off. Is there some special tool I need to remove these races?
 

89nx125

Member
Oct 23, 2007
16
0
managed to get the lower race off, but the upper one is still stuck. looks like the adjuster nut was loose and the bearings weren't riding on the races. I can see the groove the bearings worn on the frame. plus it looks like the groove is making it even more difficult to remove the race. Where can I get the steering race remover you mentioned?
 
Top Bottom