white knuckes
Member
- Jul 19, 2004
- 36
- 0
- Thread starter
-
- #26
Talked one of the tech's at Sudco about the PJ vs. PWK . He went into detail about the PJ being nasty for linear response. They were best used for MX and have a tendency for quick hit. Re-jetting with many attempts may get close to what I'm looking for but he said the PWK is far less painful.
They built one with the specs I need (155 main, 42 Pilot, and BGP needle) for about $190. Not bad considering the slide will be a factory 5 instead of the 6 a generic PWK would ship with.
So I dropped the needle and picked up a 50 pilot for the PJ. Sudco recommended a 50 as they are jetted fatter in the slow circuit. On closer inspection I found it’s a 34mm. I'll give her a try tomorrow and wait for the brown truck.
They built one with the specs I need (155 main, 42 Pilot, and BGP needle) for about $190. Not bad considering the slide will be a factory 5 instead of the 6 a generic PWK would ship with.
So I dropped the needle and picked up a 50 pilot for the PJ. Sudco recommended a 50 as they are jetted fatter in the slow circuit. On closer inspection I found it’s a 34mm. I'll give her a try tomorrow and wait for the brown truck.