Pointed CRF fender on 97 CR250, Can it be done

[A7594217]

Hi i recently saw a 2000 CR500 with a newer crf450 pointed fender on it. It looked great, made the bike look so much newer. I have a 97 cr250 and I would LOVE to do this. Does anyone know if it bolts up and if not what mod has to be done to make it fit.

Also would i get a crf250 or 450 and what year. If the bolt holes are the only part that dont line up then thats not a problem but it needs to fit between the forks etc.

Thanks :ride:

 

[A7594217]

I have the pics but i cant figure out how to post them, it keeps saying please remove links before posting??

 

[XRpredator]

just gotta make sure the holes match up. shouldn't be any problem.

 

[76GMC1500]

Front fender, right? I'm pretty sure the bolt hole arrangement has been the same for a very long time.

 

[A7594217]

Sweet, i might have to try this. I cant believe more people havent done this.

 

[Ol'89r]

The hole pattern is the same and it will fit between the forks. I installed one on my XR350 Honda with a '88 CR250 front end. Had to add a couple of washers on the rear mounting bolts to get the right angle on the fender and had to trim a little off of the back of the fender to clear the pipe. Other than that, it fits good and looks good. :cool: The CRF250 and CRF450 are basically the same fender.

 

[SQUIRLEYMOFO]

I put an 2006 front fender on my 2003 CR250.............went right on.

 

[XR250rdr]

I dont think Honda has changed the bolt pattern on their front fenders in many years. Which is a good thing IMO.

 

[A7594217]

AWSOME :ride: