Reply to thread

Message: [QUOTE="cujet, post: 873006, member: 19501"] The headpipe and to a lesser extent, the stinger area of an expansion chamber are the hot areas. The headpipe is very hot, and requires standard high heat paint. The belly section is fairly cool due to expansion and most paints will hold up well here. However powder coating is not really an option as it melts at a low temperature. Jet Hot coatings (available in all sorts of colors) are a nice way to go, as they look cool and hold up very well. But they can change the tuning of the chamber slightly as they hold in a little more heat. I generally do not see this as a problem, as the effect is minimal, certainly less than say a hot day vs. a cold day. Chris [/QUOTE]