Pro Circuit R-304 Shorty Silencer Dissasembly?

[DirtDragon]

I took out the three hex head screws and I assume the pipe and the insides slide out correct? This isn't happening..am I doing something wrong? I am in dire need of a repacking and this isn't helping the situation one bit hehe

Travis

 

[Jaybird]

It probably has some silicone sealant helping to hold it in.
Try wraping a rag around the exhaust end and twisting it with plyers. It will come out. It's a good thing for the fit to be real tight like that.

 

[DirtDragon]

Thank you for the reply, I will give this a shot today :)

Travis

 

[Moto Squid]

...and don't start jamming a screwdriver in there and prying. But it's not as if I'd know anything about doing something that stupid :confused:

clamp it up then start wiggling, eventually it'll come out...hopefully

 

[DirtDragon]

Originally posted by Moto Squid
...and don't start jamming a screwdriver in there and prying. But it's not as if I'd know anything about doing something that stupid :confused:

clamp it up then start wiggling, eventually it'll come out...hopefully

heheh that never crossed my mind, but thanks for the heads up :D