SpectraSVT
Member
- Apr 17, 2002
- 720
- 0
I recently purchased the Doug Henry bend to replace the RM high bends that I bent. I didn't like the extreme pullback of the RM highs(2.87) so I got the DH bend (2.24). I love the bend but they are just not high enuff. So if I understand pro tapers specs list I should like the KX high but at 4.25" high I am wondering if they are too high? Thats abouts a 3/4" taller than the Doug Henry's at 3.62".
The next bar with similar pullback (2.13) is the Windham MX pro at 3.9" which is not as drastic a height change as the KX. I am assuming that the KX and Windham bend are a bit straighter than the DH bend but not by much.
I am 6' 3" and I have a 03 YZ 250 with universal mounts (3/4" rise). Are these pretty safe bends...nothing too drastic? not too straight?
The next bar with similar pullback (2.13) is the Windham MX pro at 3.9" which is not as drastic a height change as the KX. I am assuming that the KX and Windham bend are a bit straighter than the DH bend but not by much.
I am 6' 3" and I have a 03 YZ 250 with universal mounts (3/4" rise). Are these pretty safe bends...nothing too drastic? not too straight?