Hi guys: This is a long question SORRY
I have this problem, last week I received the shock absorber (Suzuki RM 250 '93) from a guy that says he is a suspension tuner.
To make a long story short, the shock feels like a brick and I went over the bars. Hard on compression and really slow on rebound. Sick of waiting I disassembled the thing and found this :
Nut, thick washer,
rebound stack: (outside dia by thickness all in mm) 23x.25, 24x.25, 25x.05, 25x.25, 26x.25, 27x.30, 36x.10, 36x.10, 28x.25, 30x.25, 32x.30, 34x.25, 36x.15, 36x.15, 36x.20, piston,
compression stack: 10 washers 40x.10, 38x.20, 36x.25, 32x.10, 32x.10, 28x.3, and 23, 22, 20, 18x.30; thick washer
I am a little confused on this and it seems to me the stacks are wrong, the shock feels hard and the oil is Maxima Shock fluid 03w, nitro pressure is OK, bushings are OK, spring is the same that worked before, and the bike is for enduro racing.
I think that this is too much to ask, but I would like to know what is wrong. If someone of you has the info on the stock stacks or something that works I would really appreciate it.
Thanks again and sorry for the long post, you are my last hope.
Pedro :)
Pls excuse my English...