Putting On New Seat Cover

[Andre74]

Gday as it reads.. its for a yz250

Old seat is faded and looking worse for wear so it needs a new cover.

Ok best way would be to what i have bought a never cover,
Do i rip the old original one off?
Do i glue the whole seat or just under neath and staple it in?

Any advise on this is appreciated.

Cheers
Andre

 

[CR500pilot]

Remove the old one and staple the new one on. You'll have to stretch it tight as you go. You'll need a decent stapler and 1/4" staples. You will have to pull old staples out, so you can verify the length when you do that. I'm no expert, but I've replaced 3 of them now and they turned out pretty good.

 

[Badgadjit1]

its pretty hard to get it perfect. i would maybe use some spray adhesive to help keep it down, i ended up with a couple wrinkles after all my stretching. good luck!

 

[Andre74]

Cheers guys let ya know it turns out!

 

[Andre74]

Hey Piss easy... 30 mins later with a staple gun all done !

To easy,