pw govenor

J

jeffandtat

Member

May 13, 2006

6

0

• May 13, 2006

• #1

have a 2000 pw 80 how do i remove the govenor?

 

B

Bob Tiley

Member

Aug 7, 2001

37

0

• May 17, 2006

• #2

I would like to know the same thing. I think the governor is built intothe electronic ignition and the spark box would need to be replaced with a really old one. I think changing the jets will give us a lot more top end.

 

J

jeffandtat

Member

May 13, 2006

6

0

• May 21, 2006

• Thread starter
• #3

I have heard there is another way to increase the power in the exhaust system there is a reducer washer. i am going to do a tear down today. i will let you know.

 

J

jeffandtat

Member

May 13, 2006

6

0

• May 21, 2006

• Thread starter
• #4

no reducer

took the whole exhaust system off and there is no reducer. Must be the ignition box.

 

M

mark 2550

Member

May 28, 2006

1

0

• May 28, 2006

• #5

I just bought my son a pw80 and if you have the reducer installed it will be where the exhaust attaches to the head and it's merely a washer with a smaller diameter hole in it.

 

F

FruDaddy

Member

Aug 21, 2005

2,854

0

• May 28, 2006

• #6

Pretty much. Some dealers sell the bike without the restirctor. To check, it the two 10mm bolts at the bottom, you don't have to completely remove them, just loosen them a bunch and push the exhaust forward. It is sometimes easier to completely remove the screws.