Question for Jeremy

I got a shock rebuild and new shock spring (5.5) and new fork springs (4.8) through your associate John Curea at East Coast Racing. I just installed the fork springs and noted they were about 1-1/2" - 2" longer than stock. I also found that the stock plastic bushing/washer that is used on each end of the stock spring could not be re-used with the new springs which I discarded.

My questions are: The springs rub the inside of the slider most likely because of the extra length. Is this a problem?

Also, should I try to fashion a new plastic bushing?

I appreciate the quick turn around on the rebuild and parts!

Randy Brown

Its my KTM 300exc. I have since contacted John at East Coast Racing. He had me measure the stock springs. Once I gave him the length he stated that I received the wrong spring. He is sending me the correct set.