Hi, I just sold my crf230 and bought a 03 kdx200 and must say I'm pretty impressed! The power in stock form is pretty impressive but I plan on modding it in a few months and my question is this...
I want more power throught the range because I ride alot of wide open throttle in upper gears and also ride in tight technical woods. If I did the rb carb mod mentioned in the hop up guide and added a rev pipe would this help? I want good low end to lug me up hills and get through tougher terrain. but I also want more topend because I ride alot of wider trails/fields too. My thinking is by doing the carb mod I will have better bottom end and tourqe and the rev pipe will help with the mid through top so Ill have a bike that will have good lowend traction that continues into a good mid and strong topend. I'm also plan on adding power reeds, removing airbox lid, and going up maybe 2 teeth on the back sprocket. By doing these mods will I accomplish what I want? Thanks for the time and sorry for the long post.
I want more power throught the range because I ride alot of wide open throttle in upper gears and also ride in tight technical woods. If I did the rb carb mod mentioned in the hop up guide and added a rev pipe would this help? I want good low end to lug me up hills and get through tougher terrain. but I also want more topend because I ride alot of wider trails/fields too. My thinking is by doing the carb mod I will have better bottom end and tourqe and the rev pipe will help with the mid through top so Ill have a bike that will have good lowend traction that continues into a good mid and strong topend. I'm also plan on adding power reeds, removing airbox lid, and going up maybe 2 teeth on the back sprocket. By doing these mods will I accomplish what I want? Thanks for the time and sorry for the long post.