Rear shock seal removal and comp adjuster removal?

KawieKX125

~SPONSOR~
Oct 9, 2000
948
0
I have a 99 KX 125 and just today, the shock decided to blow the seal, what luck. I can rebuild shocks and just have never done it on a shock with high and low speed comp adjusters. How do you remove this? Also, when bleeding, I put the bleed bolt to the highest point and then just crack it open to let air out? Also, last question, how do I hold the shock shaft still while I remove the nut that holds on the valving so that I can replace the seal? Thanks.

------------------
Aaron's web site
 

Sage

dirtbike riding roadracer
Mar 28, 2001
621
0
You don't need to pull the adjusters out, if your going to do it yourself buy a factory manual or copy the pages from a local kawasaki dealer, if their cool they will let you, telling you how to rebuild your shock over the forum would take a long time.

If your dealer is being a butthead about the info let me know and I'll fax you the pages.

------------------
Sage Wilkinson, KDX Link 1

[This message has been edited by Sage (edited 03-30-2001).]
 

Sage

dirtbike riding roadracer
Mar 28, 2001
621
0
Going riding, call after 4:30-5:00 I should be around.

------------------
Sage Wilkinson, KDX Link 1
 
Top Bottom