Rejet after fitting Boyeson reeds?

[Wis]

Hi to all,
I've just fitted a set of Boyeson power reeds to my '00 200, I have already fitted an FMF torque pipe and P.C. 2 muffler, done the air box mod and after these mods I had a rejet done. I have now fitted the reeds, would I need to rejet again? I have not ridden the bike yet since fitting them.:confused:
Thanks Wis.

 

[jaguar]

best way to find out is fiddle with the needle setting. raise it a notch and see if the power is crisper or not.
If not then try a lower position. Discovering things yourself is always a joy.
Don't forget to play with the air screw setting.

 

[bud]

Wis, yep. With Boyessen reeds you will need leaner jetting than with the stock reeds. For me it has been at least one size leaner on both pilot and main, sometimes 2 sizes leaner. The jetting specs on the justkdx site were spot on for my kdx.

 

[Wis]

Thanks from Wis

Thanks very much for the advice, I have lifted the clip on the needle on groove just for the weekend, I have just got back from a full days riding, and although the bike is not quite as crisp, when the power hits, it is much stronger. The reeds seem to be a good move for the money. I'll take your advice and rejet properly now. Thanks again
Wis.