RM250_sutton
Member
- Jul 19, 2009
- 45
- 0
i have a 1995 RM250 and it has had compression problems and would not start for the longest time now. posted many questions on this site but has failed.
ran fine. a little hard to start but after would run fine. never really idled. and would overheat a lot.
finally gave up and took off the head of the cylynder and the 2 gaskets were fine. listened closely to the piston moving up & down and sounded fine. looked at the cylinder was in perfect condition. (were replaced recently)
but still no compression. (can push it down with my finger)
no my oil is not "milky" so radiator fluid is not mixing with the oil.
this bike was a great bike and i just want it back.
(im no mechanic...please be specific and "sugar coat it" if you will)
thanks in advance
RM250_sutton :ride:
ran fine. a little hard to start but after would run fine. never really idled. and would overheat a lot.
finally gave up and took off the head of the cylynder and the 2 gaskets were fine. listened closely to the piston moving up & down and sounded fine. looked at the cylinder was in perfect condition. (were replaced recently)
but still no compression. (can push it down with my finger)
no my oil is not "milky" so radiator fluid is not mixing with the oil.
this bike was a great bike and i just want it back.
(im no mechanic...please be specific and "sugar coat it" if you will)
thanks in advance
RM250_sutton :ride: