So i tore apart my top end cuz i thought my top end blew. so i took off the cylinder to check things out. well come to find out one of my reeds had come off the cage and got into my crank. needless to say the reed was destroyed. i think i ended up over tightening the screws and it stripped out. so i was able to get all the pieces of the reed out, but one little corner.
as u can see, it did left some pretty knarly scratches on my crank. how bad are they? do i have to get a new crank? or do u think this one is still fine?
maybe i'm dumb, but scratches on the crank doesn't sound that bad. so i just wanted to get some opinions on this.
Those scratch's won't hurt anything. You must make sure that every peice of reed and anything else is out. If you've got everything out and it didn't chew up the reed to bad unlikey your seals are damaged since they are outboard of the crank bearings.
i'm gonna try and get the last little piece out, but i'm not sure if i'll be able to. it's really small, it's like a inch in diameter, but i know that could still do some damage. i'm just glad that every1 is sayin i'm fine, cuz i'm not in the mood to throw another 5 hundo at my bike...i sent my cylinder off to get replated.
I note that you say a reed broke off and that you might have stripped out a reed screw. Did you find the screw or did it stay in place and just the reed broke off and got ingested?
Hate to see ya get it all buttoned back up and forget the screw
I note that you say a reed broke off and that you might have stripped out a reed screw. Did you find the screw or did it stay in place and just the reed broke off and got ingested?
Hate to see ya get it all buttoned back up and forget the screw
yeah, i got all the screws. it was weird, i think i kinda went into shock when i pulled the cage out, cuz it really doesn't make sense to me. i just took it apart w/o really thinkin what happened.