saveaux

Member
Jul 20, 2005
140
0
I just ordered a SRC fork brace and was wondering if anyone had any input on them of what to expect. I weigh in at 160 with gear and have added XR400 springs and a WER damper to the front end. I have read alot of people rave about how much more stiff the front end is after a MX fork transplant. Will this brace make the front end feel similar to that of the larger tubed MX forks?
 

saveaux

Member
Jul 20, 2005
140
0
Ok well apparently I didn't reealize that I won't be able to run my WER damper and the SRC unit both at the same time. I suppose that I could take the damper off just to test the SRC unit. Sigh....
 

saveaux

Member
Jul 20, 2005
140
0
I ran both the fork brace and WER stabilizer with no problems what so ever. Perhaps having XR400 springs helped out on not bottoming out like I heard it would, I dunno. I actually couldn't tell the difference with the fork brace on as opposed to off. I wouldn't recomend putting one on unless you get it dirt cheap like I did. I will show some pictures.

P1010017.JPG

P1010018.JPG

P1010020.JPG
 


Top Bottom