Stiffer fork springs - Revalving needed ?

Dogger

Member
Dec 31, 2001
25
0
I ordered a stiffer set of fork springs for my Showa fork, since current .40kg/mm are too soft for my weight. I'm installing 0.44 springs which were recommended for my weight/riding habits. My question is, do I need to revalve the rebound damping because of so much heavier springs? Or will the clickers do the thing?
It would be convenient to revalve now when the forks are disassembled so let me hear Your experiences if You've done similar spring changes.
The bike is a '93 Honda CR250.
 

Welcome to DRN

No trolls, no cliques, no spam & newb friendly. Do it.

Top Bottom