Hey - I did some research here on DRN concerning the availability of molybdenum disulfide grease/oil and there are definately loads of good information, Thanks for that.
The bottom line is that after reading the recommendations on various products out there, I've searched my local MX shop, small hardwares, and chain stores (Walmart,HDepot) and can't find any moly grease anywhere - the clerks are usually uninformed and point me in the direction of "Acme Grease" :laugh: I did find a Moly dry film aerosol at a local sportsman's store.
Concerning a YZ Power Valve re-assembly, I've decided to do the following:
Apply the Moly dry fim lubricant to the main PV and apply Super Lube Gease (Synthetic) to the pully grooves (the manual calls for Moly Oil on both) See SuperLube specs here
Does this get the thumbs up from anyone? I just want to button up this project. :bang: Thanks!
The bottom line is that after reading the recommendations on various products out there, I've searched my local MX shop, small hardwares, and chain stores (Walmart,HDepot) and can't find any moly grease anywhere - the clerks are usually uninformed and point me in the direction of "Acme Grease" :laugh: I did find a Moly dry film aerosol at a local sportsman's store.
Concerning a YZ Power Valve re-assembly, I've decided to do the following:
Apply the Moly dry fim lubricant to the main PV and apply Super Lube Gease (Synthetic) to the pully grooves (the manual calls for Moly Oil on both) See SuperLube specs here
Does this get the thumbs up from anyone? I just want to button up this project. :bang: Thanks!