stu182
~SPONSOR~
- Dec 11, 1999
- 90
- 0
Well , rode all day then when i got back to the house figure i rip threw the creek a few times, Went to jump a rock and the throttle stuck wide open, after about 40 foot of hanging on then tying to get away from the bike, I finnaly stopped rolling. The bike was wfo so i hit the kill, no good, jerked the plug, no good, trying to pick a wfo bike up isnt a good idea either, So i pulled the gas line. It finnaly stopped. Trashed bars and triple clamps, and possible blown motor.
Thats the question. There is a knock / clunk when i slowly kick it. I havent tried starting it yet, I'm hearing alot of botom end motor noise. Like maybe something is rubbing but not grinding? Oil was kinda dark tan milk. It kicks over fine doesn't seem to be anything binding up other than the noise. I just got the motor back from 2 fast racing had new bottom and top done. Does it sound like ima have to do it again?
Thats the question. There is a knock / clunk when i slowly kick it. I havent tried starting it yet, I'm hearing alot of botom end motor noise. Like maybe something is rubbing but not grinding? Oil was kinda dark tan milk. It kicks over fine doesn't seem to be anything binding up other than the noise. I just got the motor back from 2 fast racing had new bottom and top done. Does it sound like ima have to do it again?