Thread size for XR flywheel puller

[ditchrider]

Hi again People. Does any one know what the proper size is for a 84 XR350R flywheel puller. I bought two in a clearance bin at my local honda dealer for 7.00 each, one is a 20mmX1.5 and the other is a 22mmX1.5. When I asked the parts guy he said and I quote "it says XR on the package so it must fit right" the price was good so I scooped em both. Hope someone can help. Ditchrider out.

 

[NDRO RDR]

Rear Axle

I'm not sure if it applies to your 350, but on the 250s and 200s you can use the rear axle to pop the flywheel off. simply pull the rear axle and screw it in to the flywheel and it will pop right off the shaft. You may need to use a strap wrench to hold the flywheel and something to turn the axle, but it does work for free.

Hope this helps
Rob

 

[ditchrider]

Great idea Rob. Got any other cheap tool tricks. Thanks.Jim