superman27e

Member
Nov 12, 2009
1
0
I'm trying to rebuild the carb on my little brother 2003 xr70.

I can't figure out how to remove the throttle cable from the top of the carb. If anyone can help me figure this out, it'll be smooth sailing from there.:)

Any help would be greatly appreciated. :)
 

Patman

Pantless Wonder
LIFETIME SPONSOR
Dec 26, 1999
19,774
0
Unscrewed the top from the main body.
Pull the slide assy and cap off the main body.
Collapse the sping so it is smashed up against the cap and the slide (round part with needle) is dangling from the cable.
Push cable down and then slide it through the slot in the slide and it's all done.

Make SURE you understand how this works BEFORE you pull it apart of you will never figure out how to put it back together.

Make sure you put the slid back in the main body correctly, it fits many ways (it's round) but it only works one way. Line up the slit in the side with the locating pin in the main body of the carb.
 
Top Bottom