Tm Clutch Slipping

[bumf]

when i bought the bike the clutch was sticking and would pull eaven with the clutch in so i took the clutch apart and replaced the clutch basket the steels and the friction plates now when i go to pull off the clutch is slipping i dont know why because everything is new? any ideas

 

[wornknobby]

you didn't replace your springs?

that could be your problem, your springs maybe worn, other than that i dont' know if the TM clutch is set up like every other jap bike

 

[nickyd]

what wornknobby said - and you usually need to readjust the cable when you replace the clutch. make sure its not so tight that its actuating the pushrod.