Jun 25, 2010
48
0
I recently ordred a top end gaket set to do a top end rebuild on my 125. The set came with a lot of extra gaskets and three big o rings that I don't where they go. I know what three of them are(head, base, and exhaust port) but the rest I am clueless.

Here is the link to the picture.
http://i792.photobucket.com/albums/yy205/DirtRider1341/Gaskets.jpg
 

FruDaddy

Member
Aug 21, 2005
2,854
0
Reed valve, probably power valve shaft o rings. One of them looks like a water pump cover gasket. Some of them may be for parts that you don't actually have to remove. I can replace the piston on a KTM 85 and only need 1 gasket, or I can pull it down and use a lot more than there are in your kit. It contains everything that you will need if you completely disassemble the cylinder. Pay attention as you take it apart.
 

Patman

Pantless Wonder
LIFETIME SPONSOR
Dec 26, 1999
19,774
0
Are those "big O rings" actually a couple of pump seals?
 
Top Bottom