First thing you'll want to do is order a shop manual, Wiseco piston kit and make sure your local dealer has gaskets etc in hand. Be sure to check out the Tech Tips section on JustKDX where you'll find an article on how to properly remove the nut on top the main KIPS shaft and a correction for how the manual identifies the KIPS valves.
Once you've read through the manual get back to us with some specific questions and we'll take it from there.
If you have some specific questions while you are doing the rebuild fire off an email and I'll give you my phone number.
justkdx@hotmail.com .
If worst comes to worse you might have to pull the engine and drive north for a couple hours. When you see Fort Saskatchewan turn right and we'll take it from there.